|
BODY
Species: Multiple birch wood laminate pieces (each one approximately .075” thick), each dyed with a different color then compressed and bonded together to form one solid block of wood.
Style: Sculpted SG top and Back
NECK
Species: Multiple birch wood laminate pieces (each one approximately .075” thick), each dyed with a different color then compressed and bonded together to form one solid block of wood.
Profile: Traditional
Peghead Pitch: Angled Headstock - 17 degrees
Nut: Corian
Nut Width: 1.695
Joint Angle: 3.0 degrees (+/- 15 seconds)
Neck Joint: Mortis & Tenon set joint
Neck Joint Location: 19
Head Inlay: Gibson Logo - Silk Screened
Truss Rod: Adjustable Truss Rod
Truss Rod Cover: Bell-shaped cover with the “SG” logo silkscreened
FINGERBOARD
Species: Ebony
Radius: 12 inch
Scale Length: 24 3/4"
Number of Frets: 24 (Nickel and Silver Alloy Fret Wire)
Inlays: None
Fingerboard Binding: None
HARDWARE
Plating Finish: Chrome
Tailpiece: Stop Bar
Bridge: Tune-O-Matic
Knobs: Clear Top Hats
Tuners: Grovers
ELECTRONICS
Neck Pickup: 496R
Bridge Pickup: 500T
Controls: 1 Volume, 1 Tone, 3-way Switch
CASE
Type: Gibson deluxe gig-bag
Silkscreen: Gibson USA Logo
FINISHES
Rainbow
Black and Red
Black and White
Black and Natural
Red and Blue.
|
